How To Clean The IQ2 Vaporizer?

Mouthpiece Cleaning

• Remove the Zirconia mouthpiece.
• Remove Silicon Gasket from Mouthpiece.
• IMMERSE all pieces in a small glass or container and completely cover with isopropyl alcohol.
• Leave overnight.
• Rinse with warm water and allow dry before reassembly.

Flavor Chamber Cleaning

• IMMERSE all pieces in a small glass or container and completely cover with isopropyl alcohol.
• Remove the cap from Flavor Chamber.
• Remove the O-ring.
• Using METAL PICK TOOL - extract residue and material from the cap.
• Use a brush to clean the inside of the Flavor Chamber.
• IMMERSE all pieces in a small glass or container and completely cover with isopropyl alcohol.
• Leave overnight.
• Rinse with warm water and allow dry before reassembly.

Bowl Cleaning

• Open the bottom lid.
• Use CHIMNEY BRUSH to sweep the inside of a bowl.
• Once all loose material is swept out, use a q-tip dipped in isopropyl alcohol and swab inside of a bowl.
• Allow dry and perform (1) burn-off cycle before loading for next use.
• * Burn-off cycle: Turn the bowl on Precision Temperature Control Mode and set it to 430° F (221° C) and run for 2 minutes. Turn it off and allow cool before loading for the next use.

Pearl Cleaning

• Twist counterclockwise to remove.
• Use a q-tip dipped in isopropyl alcohol and swab inside the cavity, in and around the threaded post.
• IMMERSE in a small glass or container and completely cover with isopropyl alcohol.
• Leave overnight.
• Rinse with warm water and allow dry before reassembly.

The exterior of Unit

• Dampens a cloth with warm water.
• Wipe down the exterior of the unit and allow dry before the next use.
• Use an isopropyl alcohol pad to clean heavy residue.
• Do NOT use soap or household cleaners.