- The first step is to charge your Yocan Evolve Plus XL Vaporizer before use.
- After charging the battery, continue powering the Yocan Evolve Plus XL Vaporizer by pressing the power button 5 times. Note: The power button is located at the middle part of the battery facing outwards and is the oblong-shaped/elongated button on the vaporizer battery.
- Once the Yocan Evolve Plus XL Vaporizer is powered on you can begin the sterilization process. You can sterilize the coils by pressing and holding the power button for 5 seconds two or three times. Note: perform sterilization the first time you receive your Yocan Evolve Plus XL Vaporizer. This will eliminate and get rid of any impurities that might have made their way to the heating chamber during the manufacturing process.
- After sterilizing the coils, let the vaporizer rest and sit for about 2 – 3 minutes. After that, you can begin loading your select concentrates onto your Yocan Evolve Plus XL Vaporizer.
- Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the post located in the middle of the Yocan Quad Coils.
- Return the coil cap by winding it clockwise. Note: make sure not to overtighten the threaded connection as it could damage it and cause it to be loose altogether.
- Return the mouthpiece by sliding it back to the magnetic connection and assemble the Yocan Evolve Plus XL Vaporizer.
How To Prepare The Yocan Evolve Plus XL Vaporizer?
Comments
0 comments
Article is closed for comments.