How Do I Use The Control Panel On The ERP-MINI Electric Rosin Press?

Alan Bueno

Plug in the press and turn on the power switch.
Set the desired temperature and time for each control panel.
Use parchment paper to cover the prepared material and place it in the center of the bottom platen.
Lower the top plate by pushing the Down button to start pressing.
Activate the timer by pressing the TIMER button on the control panel.
When the countdown ends and the press beeps, press the TIMER button again to turn off the timer.
Lift up the top plate by pushing the UP button.
Remove the pressed material using heat-resistant gloves or tools with caution.
Turn off the machine by flipping the ON/OFF switch, unplug it, and disconnect the AC power cord when done pressing.
After the platens have cooled down completely, you can clean and store the press. Rosin oil will be adhesive on the parchment paper, and you can use the rosin tool to collect the oil when it cools down and store it in a silicon jar.

Related to

Comments