Make sure to keep your XS unit and e-Chambers clean for best results. We recommend using 91% or higher isopropyl alcohol (ISO) to clean any residue in and around your e-Chamberand glass attachment. Use 71% or lower ISO on your unit/shell, any higher and you risk removing the paint finish from the shell of the unit.
We recommend cotton swabbing e-Chambers after every use to extend the life and flavor of these parts. Use a dry cotton swab to mop up any left over residue. While the e-Chamber is still warm, use a cotton swab dipped in ISO to remove any stubborn blemishes. Chazzing/Staining may occur over time, but this is normal with all dab rigs and should not compromise flavor or function.
Remove the glass attachment from the unit. Using a cotton swab or paper towel dipped in ISO, clean any residue in and around the heating chamber, dab tool, and carb cap. Let all parts air dry completely before use.
Remove water from the glass attachment by blowing in to the mouthpiece. You may need to shake out the last couple drops. To clean glass attachments, fill with ISO and shake vigorously until all blemishes are removed. You may need to repeat this step. Completely rinse with water and let air dry.
*Do NOT soak XS e-Chambers in ISO or any other liquid.*
Article is closed for comments.