Make sure the battery is fully charged and the unit is powered on with 5 rapid clicks of the power button. The unit is ON when the lights illuminate.
Make sure all connection points between the e-Chamber and the unit are clean. Use a cotton swab dipped in ISO to clean connection points.
Do not force the threading of the e-Chamber onto the main unit, it should thread on smoothly. Forcing the threading may cause cross-threading and damage the e-Chamber and/or unit.
The e-Chamber should be completely threaded down, about finger tight, to avoid residue getting in the connection port.
XS Dab Rig Error Codes
3 RED Blinks: Unit fault. Remove the e-Chamber and fully Clean all connection points between the e-Chamber and the unit with a cotton swab and ISO alcohol. e-Chamber replacement may be needed.
3 WHITE Blinks: Open circuit/no e-Chamber. Remove the e-Chamber from the unit and clean all connection points between the e-Chamber and the unit with a cotton swab and ISO alcohol. Make sure the e-Chamber sits flush on the unit and is completely threaded down. e-Chamber replacement may be needed.
3 PINK Blinks: Battery fault. Make sure the battery is fully charged and the e-Chamber is installed correctly. If you continue to have issues, please contact support.
3 ORANGE Blinks: Charge fault. Make sure the battery is fully charged and the e-Chamber is installed correctly. If you continue to have issues, please contact support.
Comments
0 comments
Article is closed for comments.